Impact crusher
  • Impact crusher

  • Product Description
  • 【Feeding fineness 】<500mm
    【Productivity】37-260T/h
    【Application】Metallurgy, Mining industry, Concrete production,Chemical industry, Highway construction, Water reservoir,etc.
    【Materials resolved】the stones of a medium or low hardness such as the limestone, the feldspar, the calcite, the talcum and the gangue.
send inquiry

    The impact crusher usually acted as the secondary crushing equipment in a complete crushing plant, after the jaw crusher. This kind of crusher is mostly used to crush the material of the fineness lower than 120-300 mm with a compression lower than 320Mpa. It has a wide application prospect in the fields like metallurgy, the construction, the infrastructure, the chemical industry and the phosphate industry. In addition, the impact crusher also has the advantages of higher contents of cubes, high efficiency, east maintenance and low cost, which the cone crusher hasn’t. So for the stone of low hardness and if you want a higher productivity, we recommend this impact crusher for you as the secondary crushing equipment.

 

china Raymond Mill for sale china Raymond Mill for sale

buy Raymond Mill manufacturer cheap Raymond Mill suppliers

    It is a kind of crushing equipment, using impact energy to crush materials. When materials get into the area where the board hammer plays a part, under the impact function of board hammer at a high speed, the crushed ones are thrown to the impact device above the rotor continuously. And then they are rebounded from the impact liner to the area where the board hammer plays a part, and are impacted again. The materials from large ones to small ones get into the impact cavity for being crushed repeatedly. The process is going on until the materials are crushed to the required sizes and discharged from down of the machine.


The blow bar, the impact plate and the liner plate are all made of the highly hard and wear-resistant materials, which is small in size but light in weight. It may help to replace the spare parts.
Most of the products are cubic in shape, and the discharging fineness can be adjusted on your own.
The impact crusher is good for the hard and big stones; there is little contents of powder in finished products.
It has a novel structure and can be working smoothly and stably.
It is quite energy-efficiency, even with big output and a big crushing rate.
Model
Rotor Specs (mm)
Feed lenght (mm)
Max. feed size (mm)
Capacity(t/h)
Power of motor (kw)
Overall Dimensions
(mm)
PF-1007
1000*700
400*730
300
35-50
37-55
2400*1560*2600
PF-1010
1000*1050
400*1080
350
55-80
55-75
2440*2250*2650
PF-1210
1250*1050
400*1080
350
60-120
110-132
2700*2340*2900
PF-1214
1250*1400
400*1430
350
130-180
132-160
2700*2690*2890
PF-1315
1320*1500
860*1520
350
150-220
180-220
3100*3280*2670
PF-1515
1550*1500
900*1650
350
200-260
260-280
3400*3500*3280
PF-1520
1500*2000
980*2040 350 300-550 355-400 3680*3750*3400

Raw materal:

*(eg: limestone, basalt...)

Original size:

* (eg: __mm )

Capacity:

* (eg: __tph)

Output size:

* (eg: 0-10mm,10-20mm )

Country:

*

E-mail:

*

Tel:

*

Other
requirements: